You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

343 lines
14 KiB
C

/*
* Copyright 1995-2020 The OpenSSL Project Authors. All Rights Reserved.
* Copyright (c) 2002, Oracle and/or its affiliates. All rights reserved
*
* Licensed under the OpenSSL license (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
* in the file LICENSE in the source distribution or at
* https://www.openssl.org/source/license.html
*/
#ifndef HEADER_SSL3_H
# define HEADER_SSL3_H
# include <openssl/comp.h>
# include <openssl/buffer.h>
# include <openssl/evp.h>
# include <openssl/ssl.h>
#ifdef __cplusplus
extern "C" {
#endif
/*
* Signalling cipher suite value from RFC 5746
* (TLS_EMPTY_RENEGOTIATION_INFO_SCSV)
*/
# define SSL3_CK_SCSV 0x030000FF
/*
* Signalling cipher suite value from draft-ietf-tls-downgrade-scsv-00
* (TLS_FALLBACK_SCSV)
*/
# define SSL3_CK_FALLBACK_SCSV 0x03005600
# define SSL3_CK_RSA_NULL_MD5 0x03000001
# define SSL3_CK_RSA_NULL_SHA 0x03000002
# define SSL3_CK_RSA_RC4_40_MD5 0x03000003
# define SSL3_CK_RSA_RC4_128_MD5 0x03000004
# define SSL3_CK_RSA_RC4_128_SHA 0x03000005
# define SSL3_CK_RSA_RC2_40_MD5 0x03000006
# define SSL3_CK_RSA_IDEA_128_SHA 0x03000007
# define SSL3_CK_RSA_DES_40_CBC_SHA 0x03000008
# define SSL3_CK_RSA_DES_64_CBC_SHA 0x03000009
# define SSL3_CK_RSA_DES_192_CBC3_SHA 0x0300000A
# define SSL3_CK_DH_DSS_DES_40_CBC_SHA 0x0300000B
# define SSL3_CK_DH_DSS_DES_64_CBC_SHA 0x0300000C
# define SSL3_CK_DH_DSS_DES_192_CBC3_SHA 0x0300000D
# define SSL3_CK_DH_RSA_DES_40_CBC_SHA 0x0300000E
# define SSL3_CK_DH_RSA_DES_64_CBC_SHA 0x0300000F
# define SSL3_CK_DH_RSA_DES_192_CBC3_SHA 0x03000010
# define SSL3_CK_DHE_DSS_DES_40_CBC_SHA 0x03000011
# define SSL3_CK_EDH_DSS_DES_40_CBC_SHA SSL3_CK_DHE_DSS_DES_40_CBC_SHA
# define SSL3_CK_DHE_DSS_DES_64_CBC_SHA 0x03000012
# define SSL3_CK_EDH_DSS_DES_64_CBC_SHA SSL3_CK_DHE_DSS_DES_64_CBC_SHA
# define SSL3_CK_DHE_DSS_DES_192_CBC3_SHA 0x03000013
# define SSL3_CK_EDH_DSS_DES_192_CBC3_SHA SSL3_CK_DHE_DSS_DES_192_CBC3_SHA
# define SSL3_CK_DHE_RSA_DES_40_CBC_SHA 0x03000014
# define SSL3_CK_EDH_RSA_DES_40_CBC_SHA SSL3_CK_DHE_RSA_DES_40_CBC_SHA
# define SSL3_CK_DHE_RSA_DES_64_CBC_SHA 0x03000015
# define SSL3_CK_EDH_RSA_DES_64_CBC_SHA SSL3_CK_DHE_RSA_DES_64_CBC_SHA
# define SSL3_CK_DHE_RSA_DES_192_CBC3_SHA 0x03000016
# define SSL3_CK_EDH_RSA_DES_192_CBC3_SHA SSL3_CK_DHE_RSA_DES_192_CBC3_SHA
# define SSL3_CK_ADH_RC4_40_MD5 0x03000017
# define SSL3_CK_ADH_RC4_128_MD5 0x03000018
# define SSL3_CK_ADH_DES_40_CBC_SHA 0x03000019
# define SSL3_CK_ADH_DES_64_CBC_SHA 0x0300001A
# define SSL3_CK_ADH_DES_192_CBC_SHA 0x0300001B
/* a bundle of RFC standard cipher names, generated from ssl3_ciphers[] */
# define SSL3_RFC_RSA_NULL_MD5 "TLS_RSA_WITH_NULL_MD5"
# define SSL3_RFC_RSA_NULL_SHA "TLS_RSA_WITH_NULL_SHA"
# define SSL3_RFC_RSA_DES_192_CBC3_SHA "TLS_RSA_WITH_3DES_EDE_CBC_SHA"
# define SSL3_RFC_DHE_DSS_DES_192_CBC3_SHA "TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA"
# define SSL3_RFC_DHE_RSA_DES_192_CBC3_SHA "TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA"
# define SSL3_RFC_ADH_DES_192_CBC_SHA "TLS_DH_anon_WITH_3DES_EDE_CBC_SHA"
# define SSL3_RFC_RSA_IDEA_128_SHA "TLS_RSA_WITH_IDEA_CBC_SHA"
# define SSL3_RFC_RSA_RC4_128_MD5 "TLS_RSA_WITH_RC4_128_MD5"
# define SSL3_RFC_RSA_RC4_128_SHA "TLS_RSA_WITH_RC4_128_SHA"
# define SSL3_RFC_ADH_RC4_128_MD5 "TLS_DH_anon_WITH_RC4_128_MD5"
# define SSL3_TXT_RSA_NULL_MD5 "NULL-MD5"
# define SSL3_TXT_RSA_NULL_SHA "NULL-SHA"
# define SSL3_TXT_RSA_RC4_40_MD5 "EXP-RC4-MD5"
# define SSL3_TXT_RSA_RC4_128_MD5 "RC4-MD5"
# define SSL3_TXT_RSA_RC4_128_SHA "RC4-SHA"
# define SSL3_TXT_RSA_RC2_40_MD5 "EXP-RC2-CBC-MD5"
# define SSL3_TXT_RSA_IDEA_128_SHA "IDEA-CBC-SHA"
# define SSL3_TXT_RSA_DES_40_CBC_SHA "EXP-DES-CBC-SHA"
# define SSL3_TXT_RSA_DES_64_CBC_SHA "DES-CBC-SHA"
# define SSL3_TXT_RSA_DES_192_CBC3_SHA "DES-CBC3-SHA"
# define SSL3_TXT_DH_DSS_DES_40_CBC_SHA "EXP-DH-DSS-DES-CBC-SHA"
# define SSL3_TXT_DH_DSS_DES_64_CBC_SHA "DH-DSS-DES-CBC-SHA"
# define SSL3_TXT_DH_DSS_DES_192_CBC3_SHA "DH-DSS-DES-CBC3-SHA"
# define SSL3_TXT_DH_RSA_DES_40_CBC_SHA "EXP-DH-RSA-DES-CBC-SHA"
# define SSL3_TXT_DH_RSA_DES_64_CBC_SHA "DH-RSA-DES-CBC-SHA"
# define SSL3_TXT_DH_RSA_DES_192_CBC3_SHA "DH-RSA-DES-CBC3-SHA"
# define SSL3_TXT_DHE_DSS_DES_40_CBC_SHA "EXP-DHE-DSS-DES-CBC-SHA"
# define SSL3_TXT_DHE_DSS_DES_64_CBC_SHA "DHE-DSS-DES-CBC-SHA"
# define SSL3_TXT_DHE_DSS_DES_192_CBC3_SHA "DHE-DSS-DES-CBC3-SHA"
# define SSL3_TXT_DHE_RSA_DES_40_CBC_SHA "EXP-DHE-RSA-DES-CBC-SHA"
# define SSL3_TXT_DHE_RSA_DES_64_CBC_SHA "DHE-RSA-DES-CBC-SHA"
# define SSL3_TXT_DHE_RSA_DES_192_CBC3_SHA "DHE-RSA-DES-CBC3-SHA"
/*
* This next block of six "EDH" labels is for backward compatibility with
* older versions of OpenSSL. New code should use the six "DHE" labels above
* instead:
*/
# define SSL3_TXT_EDH_DSS_DES_40_CBC_SHA "EXP-EDH-DSS-DES-CBC-SHA"
# define SSL3_TXT_EDH_DSS_DES_64_CBC_SHA "EDH-DSS-DES-CBC-SHA"
# define SSL3_TXT_EDH_DSS_DES_192_CBC3_SHA "EDH-DSS-DES-CBC3-SHA"
# define SSL3_TXT_EDH_RSA_DES_40_CBC_SHA "EXP-EDH-RSA-DES-CBC-SHA"
# define SSL3_TXT_EDH_RSA_DES_64_CBC_SHA "EDH-RSA-DES-CBC-SHA"
# define SSL3_TXT_EDH_RSA_DES_192_CBC3_SHA "EDH-RSA-DES-CBC3-SHA"
# define SSL3_TXT_ADH_RC4_40_MD5 "EXP-ADH-RC4-MD5"
# define SSL3_TXT_ADH_RC4_128_MD5 "ADH-RC4-MD5"
# define SSL3_TXT_ADH_DES_40_CBC_SHA "EXP-ADH-DES-CBC-SHA"
# define SSL3_TXT_ADH_DES_64_CBC_SHA "ADH-DES-CBC-SHA"
# define SSL3_TXT_ADH_DES_192_CBC_SHA "ADH-DES-CBC3-SHA"
# define SSL3_SSL_SESSION_ID_LENGTH 32
# define SSL3_MAX_SSL_SESSION_ID_LENGTH 32
# define SSL3_MASTER_SECRET_SIZE 48
# define SSL3_RANDOM_SIZE 32
# define SSL3_SESSION_ID_SIZE 32
# define SSL3_RT_HEADER_LENGTH 5
# define SSL3_HM_HEADER_LENGTH 4
# ifndef SSL3_ALIGN_PAYLOAD
/*
* Some will argue that this increases memory footprint, but it's not
* actually true. Point is that malloc has to return at least 64-bit aligned
* pointers, meaning that allocating 5 bytes wastes 3 bytes in either case.
* Suggested pre-gaping simply moves these wasted bytes from the end of
* allocated region to its front, but makes data payload aligned, which
* improves performance:-)
*/
# define SSL3_ALIGN_PAYLOAD 8
# else
# if (SSL3_ALIGN_PAYLOAD&(SSL3_ALIGN_PAYLOAD-1))!=0
# error "insane SSL3_ALIGN_PAYLOAD"
# undef SSL3_ALIGN_PAYLOAD
# endif
# endif
/*
* This is the maximum MAC (digest) size used by the SSL library. Currently
* maximum of 20 is used by SHA1, but we reserve for future extension for
* 512-bit hashes.
*/
# define SSL3_RT_MAX_MD_SIZE 64
/*
* Maximum block size used in all ciphersuites. Currently 16 for AES.
*/
# define SSL_RT_MAX_CIPHER_BLOCK_SIZE 16
# define SSL3_RT_MAX_EXTRA (16384)
/* Maximum plaintext length: defined by SSL/TLS standards */
# define SSL3_RT_MAX_PLAIN_LENGTH 16384
/* Maximum compression overhead: defined by SSL/TLS standards */
# define SSL3_RT_MAX_COMPRESSED_OVERHEAD 1024
/*
* The standards give a maximum encryption overhead of 1024 bytes. In
* practice the value is lower than this. The overhead is the maximum number
* of padding bytes (256) plus the mac size.
*/
# define SSL3_RT_MAX_ENCRYPTED_OVERHEAD (256 + SSL3_RT_MAX_MD_SIZE)
# define SSL3_RT_MAX_TLS13_ENCRYPTED_OVERHEAD 256
/*
* OpenSSL currently only uses a padding length of at most one block so the
* send overhead is smaller.
*/
# define SSL3_RT_SEND_MAX_ENCRYPTED_OVERHEAD \
(SSL_RT_MAX_CIPHER_BLOCK_SIZE + SSL3_RT_MAX_MD_SIZE)
/* If compression isn't used don't include the compression overhead */
# ifdef OPENSSL_NO_COMP
# define SSL3_RT_MAX_COMPRESSED_LENGTH SSL3_RT_MAX_PLAIN_LENGTH
# else
# define SSL3_RT_MAX_COMPRESSED_LENGTH \
(SSL3_RT_MAX_PLAIN_LENGTH+SSL3_RT_MAX_COMPRESSED_OVERHEAD)
# endif
# define SSL3_RT_MAX_ENCRYPTED_LENGTH \
(SSL3_RT_MAX_ENCRYPTED_OVERHEAD+SSL3_RT_MAX_COMPRESSED_LENGTH)
# define SSL3_RT_MAX_TLS13_ENCRYPTED_LENGTH \
(SSL3_RT_MAX_PLAIN_LENGTH + SSL3_RT_MAX_TLS13_ENCRYPTED_OVERHEAD)
# define SSL3_RT_MAX_PACKET_SIZE \
(SSL3_RT_MAX_ENCRYPTED_LENGTH+SSL3_RT_HEADER_LENGTH)
# define SSL3_MD_CLIENT_FINISHED_CONST "\x43\x4C\x4E\x54"
# define SSL3_MD_SERVER_FINISHED_CONST "\x53\x52\x56\x52"
# define SSL3_VERSION 0x0300
# define SSL3_VERSION_MAJOR 0x03
# define SSL3_VERSION_MINOR 0x00
# define SSL3_RT_CHANGE_CIPHER_SPEC 20
# define SSL3_RT_ALERT 21
# define SSL3_RT_HANDSHAKE 22
# define SSL3_RT_APPLICATION_DATA 23
# define DTLS1_RT_HEARTBEAT 24
/* Pseudo content types to indicate additional parameters */
# define TLS1_RT_CRYPTO 0x1000
# define TLS1_RT_CRYPTO_PREMASTER (TLS1_RT_CRYPTO | 0x1)
# define TLS1_RT_CRYPTO_CLIENT_RANDOM (TLS1_RT_CRYPTO | 0x2)
# define TLS1_RT_CRYPTO_SERVER_RANDOM (TLS1_RT_CRYPTO | 0x3)
# define TLS1_RT_CRYPTO_MASTER (TLS1_RT_CRYPTO | 0x4)
# define TLS1_RT_CRYPTO_READ 0x0000
# define TLS1_RT_CRYPTO_WRITE 0x0100
# define TLS1_RT_CRYPTO_MAC (TLS1_RT_CRYPTO | 0x5)
# define TLS1_RT_CRYPTO_KEY (TLS1_RT_CRYPTO | 0x6)
# define TLS1_RT_CRYPTO_IV (TLS1_RT_CRYPTO | 0x7)
# define TLS1_RT_CRYPTO_FIXED_IV (TLS1_RT_CRYPTO | 0x8)
/* Pseudo content types for SSL/TLS header info */
# define SSL3_RT_HEADER 0x100
# define SSL3_RT_INNER_CONTENT_TYPE 0x101
# define SSL3_AL_WARNING 1
# define SSL3_AL_FATAL 2
# define SSL3_AD_CLOSE_NOTIFY 0
# define SSL3_AD_UNEXPECTED_MESSAGE 10/* fatal */
# define SSL3_AD_BAD_RECORD_MAC 20/* fatal */
# define SSL3_AD_DECOMPRESSION_FAILURE 30/* fatal */
# define SSL3_AD_HANDSHAKE_FAILURE 40/* fatal */
# define SSL3_AD_NO_CERTIFICATE 41
# define SSL3_AD_BAD_CERTIFICATE 42
# define SSL3_AD_UNSUPPORTED_CERTIFICATE 43
# define SSL3_AD_CERTIFICATE_REVOKED 44
# define SSL3_AD_CERTIFICATE_EXPIRED 45
# define SSL3_AD_CERTIFICATE_UNKNOWN 46
# define SSL3_AD_ILLEGAL_PARAMETER 47/* fatal */
# define TLS1_HB_REQUEST 1
# define TLS1_HB_RESPONSE 2
# define SSL3_CT_RSA_SIGN 1
# define SSL3_CT_DSS_SIGN 2
# define SSL3_CT_RSA_FIXED_DH 3
# define SSL3_CT_DSS_FIXED_DH 4
# define SSL3_CT_RSA_EPHEMERAL_DH 5
# define SSL3_CT_DSS_EPHEMERAL_DH 6
# define SSL3_CT_FORTEZZA_DMS 20
/*
* SSL3_CT_NUMBER is used to size arrays and it must be large enough to
* contain all of the cert types defined for *either* SSLv3 and TLSv1.
*/
# define SSL3_CT_NUMBER 10
# if defined(TLS_CT_NUMBER)
# if TLS_CT_NUMBER != SSL3_CT_NUMBER
# error "SSL/TLS CT_NUMBER values do not match"
# endif
# endif
/* No longer used as of OpenSSL 1.1.1 */
# define SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS 0x0001
/* Removed from OpenSSL 1.1.0 */
# define TLS1_FLAGS_TLS_PADDING_BUG 0x0
# define TLS1_FLAGS_SKIP_CERT_VERIFY 0x0010
/* Set if we encrypt then mac instead of usual mac then encrypt */
# define TLS1_FLAGS_ENCRYPT_THEN_MAC_READ 0x0100
# define TLS1_FLAGS_ENCRYPT_THEN_MAC TLS1_FLAGS_ENCRYPT_THEN_MAC_READ
/* Set if extended master secret extension received from peer */
# define TLS1_FLAGS_RECEIVED_EXTMS 0x0200
# define TLS1_FLAGS_ENCRYPT_THEN_MAC_WRITE 0x0400
# define TLS1_FLAGS_STATELESS 0x0800
/* Set if extended master secret extension required on renegotiation */
# define TLS1_FLAGS_REQUIRED_EXTMS 0x1000
# define SSL3_MT_HELLO_REQUEST 0
# define SSL3_MT_CLIENT_HELLO 1
# define SSL3_MT_SERVER_HELLO 2
# define SSL3_MT_NEWSESSION_TICKET 4
# define SSL3_MT_END_OF_EARLY_DATA 5
# define SSL3_MT_ENCRYPTED_EXTENSIONS 8
# define SSL3_MT_CERTIFICATE 11
# define SSL3_MT_SERVER_KEY_EXCHANGE 12
# define SSL3_MT_CERTIFICATE_REQUEST 13
# define SSL3_MT_SERVER_DONE 14
# define SSL3_MT_CERTIFICATE_VERIFY 15
# define SSL3_MT_CLIENT_KEY_EXCHANGE 16
# define SSL3_MT_FINISHED 20
# define SSL3_MT_CERTIFICATE_URL 21
# define SSL3_MT_CERTIFICATE_STATUS 22
# define SSL3_MT_SUPPLEMENTAL_DATA 23
# define SSL3_MT_KEY_UPDATE 24
# ifndef OPENSSL_NO_NEXTPROTONEG
# define SSL3_MT_NEXT_PROTO 67
# endif
# define SSL3_MT_MESSAGE_HASH 254
# define DTLS1_MT_HELLO_VERIFY_REQUEST 3
/* Dummy message type for handling CCS like a normal handshake message */
# define SSL3_MT_CHANGE_CIPHER_SPEC 0x0101
# define SSL3_MT_CCS 1
/* These are used when changing over to a new cipher */
# define SSL3_CC_READ 0x001
# define SSL3_CC_WRITE 0x002
# define SSL3_CC_CLIENT 0x010
# define SSL3_CC_SERVER 0x020
# define SSL3_CC_EARLY 0x040
# define SSL3_CC_HANDSHAKE 0x080
# define SSL3_CC_APPLICATION 0x100
# define SSL3_CHANGE_CIPHER_CLIENT_WRITE (SSL3_CC_CLIENT|SSL3_CC_WRITE)
# define SSL3_CHANGE_CIPHER_SERVER_READ (SSL3_CC_SERVER|SSL3_CC_READ)
# define SSL3_CHANGE_CIPHER_CLIENT_READ (SSL3_CC_CLIENT|SSL3_CC_READ)
# define SSL3_CHANGE_CIPHER_SERVER_WRITE (SSL3_CC_SERVER|SSL3_CC_WRITE)
#ifdef __cplusplus
}
#endif
#endif